No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The agile-antenna-polarization enable command enables self-adaptive polarization for agile antennas.

The undo agile-antenna-polarization enable command disables self-adaptive polarization for agile antennas.

By default, self-adaptive polarization is disabled for agile antennas.

Only the AP8130DN and AP8130DN-W support this function.


agile-antenna-polarization enable

undo agile-antenna-polarization enable




2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Self-adaptive polarization for agile antennas can reduce interference between transmit signals of antennas, and increase the transmit power of antennas and the demodulation SNR of STAs. When an AP8130DN or AP8130DN-W is deployed to provide wireless coverage, you can enable this function when the following types of STA exist:
  • STA with one transmit antenna and one receive antenna in 1x1 mode
  • STA with two transmit antennas and two receive antennas in 2x2 mode
After this function is enabled, the AP uses two mutually orthogonal antennas to communicate with STAs but not a third antenna.


Dual-polarized antennas have been connected to radio ports A and B on the same frequency band.


# Enable self-adaptive polarization for agile antennas in a 2G radio profile.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] radio-2g-profile name default
[Huawei-wlan-radio-2g-prof-default] agile-antenna-polarization enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207281

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next