No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display pppoe fail-reason

display pppoe fail-reason

Function

The display pppoe fail-reason command displays PPPoE dialup failure reasons.

Format

display pppoe fail-reason

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When PPPoE dialup fails, you can run this command to check for PPPoE dialup failure reasons and locate faults.

Example

# Display PPPoE dialup failure reasons.

<Huawei> display pppoe fail-reason
--------------------------------------------------------------------------
Dialer    Last fail time         Reason                                     
-------------------------------------------------------------------------- 
 1        2017-08-21/16:57:14    Incorrect user name or password                               
--------------------------------------------------------------------------
Table 7-4  Description of the display pppoe fail-reason command output

Item

Description

Dialer

Number of the PPPoE dialer interface.

Last fail time

Time when PPPoE dialup fails last time.

Reason

Reason why PPPoE dialup fails. Table 7-5 lists PPPoE dialup failure reasons and handling suggestions.

Table 7-5  PPPoE dialup failure reasons and handling suggestions

PPPoE Dialup Failure Reason

Description

Handling Suggestion

Failed to find the server

The device fails to find the PPPoE server.

Check whether the network connection between the active and standby servers is normal.

Incorrect user name or password

The user name or password is incorrect.

Enter the correct user name and password. If the fault persists, contact technical support personnel.

Failed to set up a connection (session establishment failure)

Connection setup fails due to a session establishment failure.

Wait for the device to set up a connection again automatically. If the fault persists, contact technical support personnel.

Failed to set up a connection (link-layer negotiation failure)

Connection setup fails due to a link-layer negotiation failure.

Failed to set up a connection (network-layer negotiation failure)

Connection setup fails due to a network-layer negotiation failure.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203639

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next