No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display poe device

display poe device


The display poe device command displays information about the device supporting Power over Ethernet (PoE).

Only the AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12 support this command.


display poe device




All views

Default Level

2: Configuration level

Usage Guidelines

Before using the PoE function, run the display poe device command to check whether the device supports the PoE function. If the command output is displayed, the device supports the PoE function.


# Display information about the device supporting PoE.

<Huawei> display poe device
slot 0   : POE
Table 4-45  Description of the display poe device command output



Slot 0

The device supports PoE.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205654

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next