No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset wlan ids attack-detected

reset wlan ids attack-detected

Function

The reset wlan ids attack-detected command deletes information about the attacking devices detected.

Format

reset wlan ids attack-detected { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address }

Parameters

Parameter

Description

Value

all

Deletes information about all types of attacking devices.

-

flood

Deletes information about devices launching flood attacks.

-

spoof

Deletes information about devices launching spoofing attacks.

-

wapi-psk

Deletes information about devices that perform brute force cracking in WAPI-PSK authentication mode.

-

weak-iv

Deletes information about devices launching weak IV attacks.

-

wep-share-key

Deletes information about devices that perform brute force cracking in WEP-SK authentication mode.

-

wpa-psk

Deletes information about devices that perform brute force cracking in WPA-PSK authentication mode.

-

wpa2-psk

Deletes information about devices that perform brute force cracking in WPA2-PSK authentication mode.

-

mac-address mac-address

Deletes information about detected devices launching attacks with specified MAC addresses.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

All views

Default Level

3: Management level

Usage Guidelines

After attack detection is enabled, information about attacking devices detected is recorded. When there is excessive information recorded or the recorded information is useless, you can run the reset wlan ids attack-detected command to delete the information.

Example

# Delete information about all the current attacking devices.

<Huawei> reset wlan ids attack-detected all
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202896

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next