No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rf-ping

rf-ping

Function

The rf-ping command enables an AP to automatically detect wireless link quality.

Format

rf-ping [ -m time | -c number ] [ -p { be | bk | vi | vo }] * mac-address

Parameters

Parameter Description Value
-m time Specifies the interval for sending probe data packets. The value is an integer that ranges from 100 to 10000, in milliseconds. The default value is 1000.
-c number Specifies the number of probe data packets sent by the AP. The value is an integer that ranges from 1 to 1000. The default value is 1.
-p { be | bk | vi | vo } Specifies the priority of probe data packets sent by the AP, which can be AC_BE, AC_BK, AC_VI, or AC_VO. If this parameter is not specified, the default priority is AC_BK. -
mac-address MAC address of a STA. The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Use Scenario

This command allows an AP to automatically detect wireless link quality based on link parameters, including the signal strength, data rate on air port, and delay in packet transmission.

Prerequisites

STAs have been associated with the APs and go online.

Example

# Configure an AP to automatically detect quality of the link between the AP and STA with the MAC address 14cf-9202-13dc.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rf-ping 14cf-9202-13dc
 Tx rate=52.0 Mbps, Reply from 14cf-9202-13dc: RSSI=-58 dBm time < 1 ms         
 1 packets transmitted, 1 received, 0% packet loss, time < 1 ms, RSSI -58 dBm   
Table 8-32  Description of the rf-ping command output

Item

Description

Tx rate Transmission rate.
RSSI Received signal strength.
time Packet transmission delay.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207949

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next