No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ip forward-broadcast

ip forward-broadcast


Using the ip forward-broadcast command, you can enable an interface to forward broadcast packets.

Using the undo ip forward-broadcast command, you can disable an interface from forwarding broadcast packets.

By default, disable the interface from forwarding broadcast packets.


ip forward-broadcast [ acl acl-number ]

undo ip forward-broadcast





acl acl-number Specifies the number of an ACL.

The value is an integer that ranges from 2000 to 3999.

  • The number of a basic ACL ranges from 2000 to 2999.
  • The number of an advanced ACL ranges from 3000 to 3999.


VLANIF interface view, loopback interface view

Default Level

2: Configuration level

Usage Guidelines

The ip forward-broadcast command cannot be used on Layer 2 interfaces.


# Enable VLANIF100 to forward broadcast packets.

<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] ip forward-broadcast 
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 248725

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next