No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap auth-mode

ap auth-mode

Function

The ap auth-mode command configures the AP authentication mode.

The undo ap auth-mode command restores the default AP authentication mode.

The default AP authentication mode is MAC address authentication.

Format

ap auth-mode { mac-auth | no-auth | sn-auth }

undo ap auth-mode

Parameters

Parameter

Description

Value

mac-auth

Indicates the MAC address authentication mode.

-

no-auth

Indicates the non-authentication mode.

-

sn-auth

Indicates the SN authentication mode.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

After the ap auth-mode command is executed, the Central AP authenticates the AP using the configured mode.

The non-authentication mode brings security risks. You are advised to set the authentication mode to MAC address authentication or SN authentication, which is more secure.

Example

# Change the AP authentication mode to MAC address authentication.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] ap auth-mode mac-auth
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202997

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next