No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
contain

contain

Function

The contain command enables containment of rogue and interfering devices based on the RSSI and number of associated STAs on the devices.

The undo contain command disables containment of rogue and interfering devices based on the RSSI and number of associated STAs on the devices.

By default, containment of rogue and interfering devices based on the RSSI and number of associated STAs on the devices is disabled.

Format

contain { min-rssi min-rssi | min-sta-num min-sta-num }

undo contain { min-rssi | min-sta-num }

Parameters

Parameter

Description

Value

min-rssi min-rssi

Specifies the minimum RSSI value.

The value is an integer that ranges from -95 to -50.

min-sta-num min-sta-num

Specifies the minimum number of associated STAs.

The value is an integer that ranges from 1 to 10.

Views

WIDS view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After RSSI-based containment is enabled, if the RSSIs of detected rogue and interfering devices are no more than the specified minimum RSSI value, the devices are not contained. They are contained only when their RSSIs exceed the specified minimum RSSI value.

After containment based on the number of associated STAs is enabled, if the number of STAs associated with detected rogue and interfering devices is smaller than the specified minimum value, the devices are not contained. They are contained only when the number of STAs associated with them reaches the specified minimum value.

Prerequisites

Detection and containment of rogue and interfering devices have been enabled.

Precautions

This function is not supported in manual containment mode.

Example

# Enable containment of rogue and interfering APs with spoofing SSIDs and set the number of associated STAs that triggers containment to 5.

<Huawei> system-view
[Huawei] interface wlan-radio 0/0/1
[Huawei-wlan-Radio0/0/1] wids contain enable
[Huawei-wlan-Radio0/0/1] quit
[Huawei] wlan
[Huawei-wlan-view] wids
[Huawei-wlan-wids] contain-mode spoof-ssid-ap
[Huawei-wlan-wids] contain min-sta-num 5
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210075

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next