No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe legacy enable (AP wired port link profile view)

poe legacy enable (AP wired port link profile view)


The poe legacy enable command enables a central AP to check compatibility of the connected PDs.

The undo poe legacy enable command disables a central AP from checking compatibility of the connected PDs.


poe legacy enable

undo poe legacy enable




AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When compatibility check is enabled, a central AP (PSE) can detect and provide power for the PDs incompliant with IEEE 802.3af or 802.3at. If compatibility check is disabled, the central AP does not identify or provide power for these PDs.


This command takes effect only on the AD9430DN-24 and AD9431DN-24X.


# Enable a central AP to check compatibility of the connected PDs.
<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] port-link-profile name port-link1
[Huawei-wlan-port-link-prof-port-link1] poe legacy enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207263

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next