No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
fragment-reassemble enable

fragment-reassemble enable

Function

The fragment-reassemble enable command enables fragment reassembly.

The undo fragment-reassemble enable command disables fragment reassembly.

Format

fragment-reassemble enable

undo fragment-reassemble enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

By default, fragment reassembly is enabled.

If fragment reassembly is disabled, fragments will not be reassembled and will not be inspected. Meanwhile, TCP stream reassembly may also fail.

Example

# Enable fragment reassembly.

<Huawei> system-view
[Huawei] fragment-reassemble enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204479

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next