No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp server nbns-list

dhcp server nbns-list

Function

The dhcp server nbns-list command configures Network Basic Input Output System (NetBIOS) server addresses for an interface address pool.

The undo dhcp server nbns-list command deletes the NetBIOS server address from an interface address pool.

By default, no NetBIOS server address is configured for an interface address pool.

Format

dhcp server nbns-list ip-address &<1-8>

undo dhcp server nbns-list { ip-address | all }

Parameters

Parameter

Description

Value

ip-address

Specifies the NetBIOS server address.

The value is in dotted decimal notation.

all

Deletes all NetBIOS server addresses.

-

Views

VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command applies to DHCP servers. Before hosts communicate with each other, a NetBIOS server needs to resolve the accessed NetBIOS hostname to an IP address. To enable hosts to communicate with each other, run the dhcp server nbns-list command to configure NetBIOS server addresses for an interface address pool. When assigning IP addresses to clients, a DHCP server also assigns the configured NetBIOS server addresses to clients. To configure NetBIOS server addresses for a global address pool, run the nbns-list command.

Prerequisites
  • The address of an interface address pool has been configured using the ip address command.

  • The DHCP server function has been enabled on the interface using the dhcp select interface command.

Precautions

Each interface can be configured with a maximum of eight NetBIOS server addresses. The first assigned address functions as the primary address, and other addresses function as secondary addresses.

Example

# Specify a NetBIOS server at 192.168.1.99 for domain name resolution when IP addresses in the interface address pool on VLANIF100 are assigned to clients.
<Huawei> system-view
[Huawei] dhcp enable
[Huawei] interface vlanif 100
[Huawei-Vlanif100] ip address 10.10.10.10 24 
[Huawei-Vlanif100] dhcp select interface
[Huawei-Vlanif100] dhcp server nbns-list 192.168.1.99
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203208

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next