No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ip address bootp-alloc

ip address bootp-alloc

Function

The ip address bootp-alloc command enables the BOOTP client function on an interface.

The undo ip address bootp-alloc command disables the BOOTP client function from an interface.

By default, the BOOTP client function is disabled on an interface.

Format

ip address bootp-alloc [ unicast ]

undo ip address bootp-alloc

Parameters

Parameter

Description

Value

unicast

Indicates that the client requests the server to unicast response packets to the client.

-

Views

VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

DHCP is developed based on the BOOTP protocol. The device supports both DHCP and BOOTP and allows hosts to obtain IP addresses by BOOTP.

To enable an interface to obtain IP addresses using BOOTP, you can enable the BOOTP client function on the interface. A BOOTP client requests for an IP address from the server using BOOTP. The BOOTP client has two functions:
  • Sends BOOTP Request messages to the server.
  • Processes BOOTP Reply messages from the server.

To obtain an IP address, the BOOTP client sends a BOOTP Request message to the server. When the server receives the BOOTP Request message, it sends a BOOTP response message to the BOOTP client. The BOOTP client obtains the assigned IP address from the response message.

Example

# Enable the BOOTP client function on VLANIF100 to obtain an IP address.

<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] ip address bootp-alloc
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202215

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next