No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
smart-roam quick-kickoff-snr p-n criteria

smart-roam quick-kickoff-snr p-n criteria

Function

The smart-roam quick-kickoff-snr p-n criteria command configures the PN threshold for quickly disconnecting STAs.

The undo smart-roam quick-kickoff-snr p-n criteria command restores the default PN threshold for quickly disconnecting STAs.

By default, the number of PN observation times is 6, and the number of times criteria are met is 4.

Format

smart-roam quick-kickoff-snr p-n criteria observe-time observe-value qualify-time qualify-value

undo smart-roam quick-kickoff-snr p-n criteria

Parameters

Parameter

Description

Value

observe-time observe-value

Specifies the number of PN observation times.

The value is an integer that ranges from 1 to 10.

qualify-time qualify-value

Specifies the number of PN observation times criteria are met.

The value is an integer that ranges from 1 to 10.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the mode for quickly disconnecting STAs is set to check-snr, you can run the smart-roam quick-kickoff-snr p-n criteria command to configure the PN threshold for quickly disconnecting STAs.

PN criteria: When N conditions are met in the P range, an event is triggered. Assume that the value of observe-value is 6 and that of qualify-value is 4, and the interval for checking the SNR to determine whether to quickly disconnect STAs is 500 ms. The system detects the SNR of a STA for six consecutive times and calculates the average SNR value. If the average value is smaller than the total average value four times, the STA is forced offline.

Prerequisites

The function of quickly disconnecting STAs has been enabled using the undo smart-roam quick-kickoff-threshold disable command.

Precautions

The value of observe-value must be larger than or equal to that of qualify-value.

Example

# Set the value of observe-value to 10 and that of qualify-value to 5.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name default
[Huawei-wlan-rrm-prof-default] undo smart-roam quick-kickoff-threshold disable
[Huawei-wlan-rrm-prof-default] smart-roam quick-kickoff-snr p-n criteria observe-time 10 qualify-time 5
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206115

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next