No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
portal logout resend timeout

portal logout resend timeout

Function

The portal logout resend timeout command configures the re-transmission times and interval for the Portal authentication user logout packet.

The undo portal logout resend timeout command restores the default setting.

By default, the Portal authentication user logout packet can be re-transmitted three times within five seconds.

Format

portal logout resend times timeout period

undo portal logout { resend | timeout } *

Parameters

Parameter

Description

Value

times

Specifies the number of re-transmission times for the Portal authentication user logout packet.

The value is an integer that ranges from 0 to 15.

The value 0 indicates that the re-transmission function is disabled.

period

Specifies the re-transmission interval of the Portal authentication user logout packet.

The value is an integer that ranges from 1 to 300, in seconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After disconnecting a Portal authentication user, the device sends a user logout packet (NTF-LOGOUT) to instruct the Portal server to delete the user information. If the network between the device and Portal server is not stable or packets are lost, the Portal server may fail to receive the user logout packet from the device after the Portal authentication user is disconnected. In this case, the user is displayed as disconnected on the device but still as online on the Portal server. To enable the Portal server to receive the user logout packet and ensure that the online user information on the Portal server is correct, the administrator can enable the user logout packet re-transmission function on the device and configure the re-transmission times and interval.

Example

# Configure the re-transmission times to 5 and interval to 10 seconds for the Portal authentication user logout packet.

<Huawei> system-view
[Huawei] portal logout resend 5 timeout 10
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203051

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next