No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radio disable

radio disable

Function

The radio disable command disables a specified radio.

The undo radio disable command enables a specified radio.

By default, a radio is enabled.

Format

radio disable

undo radio disable

Parameters

None

Views

Radio interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to enable or disable a specified radio.

Example

# Disable the radio interface Wlan-Radio 0/0/0.
<Huawei> system-view
[Huawei] interface wlan-radio 0/0/0
[Huawei-Wlan-Radio0/0/0] radio disable
Warning: This action may cause service interruption. Continue?[Y/N]y
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203649

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next