No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent extend error-code enable

snmp-agent extend error-code enable

Function

The snmp-agent extend error-code enable command enables the function of sending extended error codes to the NM station on the device.

The undo snmp-agent extend error-code enable command disables the function of sending extended error codes to the NM station.

By default, the function of send extended error codes to the NM station is disabled.

Format

snmp-agent extend error-code enable

undo snmp-agent extend error-code enable

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

If the NMS and managed device are Huawei devices, error codes are extended and more scenarios are defined after the function of sending extended error codes is enabled. As a result, users are enabled to locate and troubleshoot faults quickly and accurately.

Support of the MIB for the extended error code:

  • For the MIB that supports the extended error code, you can enable the SNMP extended error code function and use Huawei NMS to provide the NM station with various error codes.
  • For the MIB that does not support the extended error code, after the SNMP extended error code function is enabled, NM stations of either Huawei or other vendors can obtain only the standard error code.

Example

# Enable the function of sending extended error codes to the NM station on the device.

<Huawei> system-view
[Huawei] snmp-agent extend error-code enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209161

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next