No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
arp anti-attack rate-limit enable

arp anti-attack rate-limit enable


The arp anti-attack rate-limit enable command enables rate limit on ARP packets.

The undo arp anti-attack rate-limit enable command disables rate limit on ARP packets.

By default, rate limit on ARP packet is disabled.


arp anti-attack rate-limit enable

undo arp anti-attack rate-limit enable




System view, GE interface view, MultiGE interface view, XGE interface view

Default Level

2: Configuration level

Usage Guidelines

The device has no sufficient CPU resource to process other services when processing a large number of ARP packets. To protect CPU resources of the device, limit the rate of ARP packets.

You can run the arp anti-attack rate-limit enable command to enable rate limit on ARP packets. When the rate of ARP packets exceeds the limit, excess ARP packets are discarded. To set the rate limit and rate limit duration of ARP packets, run the arp anti-attack rate-limit command.


# Enable rate limit on ARP packets globally.

<Huawei> system-view
[Huawei] arp anti-attack rate-limit enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194716

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next