No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display trunkmembership eth-trunk

display trunkmembership eth-trunk

Function

The display trunkmembership eth-trunk command displays information about member interfaces of an Eth-Trunk.

Format

display trunkmembership eth-trunk trunk-id

Parameters

Parameter

Description

Value

trunk-id

Specifies the ID of an Eth-Trunk.

The value is an integer that ranges from 0 to 7.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After an Eth-Trunk interface is successfully configured, you can run the display trunkmembership eth-trunk command to view the configuration of the Eth-Trunk interface and its member interfaces.

In the scenario where you need to monitor the status of an interface or locate an interface fault, you can use the display trunkmembership eth-trunk command to view detailed information about an Eth-Trunk interface and its member interfaces. You can troubleshoot the interface and its member interfaces according to the queried information.

Prerequisites

An Eth-Trunk interface is correctly configured. The Eth-Trunk interface must be created in advance; otherwise, the system prompts an error when you run the display trunkmembership eth-trunk command.

Example

# Display information about member interfaces of Eth-Trunk 2.

<Huawei> display trunkmembership eth-trunk 2
Trunk ID: 2
Used status: VALID
TYPE: ethernet
Working Mode : Normal
Number Of Ports in Trunk = 2
Number Of Up Ports in Trunk = 2
Operate status: up

Interface GigabitEthernet0/0/0, valid, operate up, weight=1 
Interface GigabitEthernet0/0/1, valid, operate up, weight=1
Table 6-14  Description of the display trunkmembership eth-trunk command output

Item

Description

Trunk ID

ID of the Eth-Trunk.

Used status
Whether the Eth-Trunk is available:
  • VALID: indicates that the Eth-Trunk is available.

  • INVALID: indicates that the Eth-Trunk is unavailable.

TYPE

Type of an Eth-Trunk.

Working Mode

Working mode of an Eth-Trunk.

  • Normal: indicates the manual load balancing mode.

Number Of Ports in Trunk

Indicates the number of interfaces that are added to the Eth-Trunk.

Number Of Up Ports in Trunk

Indicates the number of Up interfaces that are added to the Eth-Trunk.

Operate status

Eth-Trunk status:
  • up: indicates that the Eth-Trunk is in Up state.

  • down: indicates that the Eth-Trunk is in Down state.

Interface,valid,operate,weight

Detailed information about a member interface:
  • Interface: indicates the interface type and number.

  • valid: indicates that the interface is available.

  • operate: indicates the status of the interface.

  • weight: indicates the weight of the interface in load balancing.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207646

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next