No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
access-user syslog-restrain period

access-user syslog-restrain period


The access-user syslog-restrain period command sets a period for system log suppression.

The undo access-user syslog-restrain period command restores the default period for system log suppression.

By default, the period of system log suppression is 300s.


access-user syslog-restrain period period

undo access-user syslog-restrain period






Specifies the period for system log suppression.

The value is an integer that ranges from 60 to 604800, in seconds.


System view

Default Level

2: Configuration level

Usage Guidelines

After the system log suppression function is enabled using the access-user syslog-restrain enable command, use this command to set the system log suppression period. After generating a system log, the device will not generate the same log within the suppression period.


# Set the period for system log suppression to 600s.

<Huawei> system-view
[Huawei] access-user syslog-restrain period 600
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 254763

Downloads: 144

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next