No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mu-mimo disable

mu-mimo disable

Function

The mu-mimo disable command disables MU-MIMO.

The undo mu-mimo disable command enables MU-MIMO.

By default, the MU-MIMO function is enabled.

Format

mu-mimo disable

undo mu-mimo disable

Parameters

None

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Carrier sense multiple access with collision avoidance (CSMA-CA) allows an air interface channel to be occupied only by one STA, and other STAs need to back off. After MU-MIMO is enabled, STAs supporting MU-MIMO can form an MU group to simultaneously receive downlink data from the same air interface channel, improving channel efficiency and overall downlink throughput.

Precautions

the 802.11ac wave2 RUs support MU-MIMO on 5 GHz radios.

Example

# Enable MU-MIMO.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ssid-profile name test
[Huawei-wlan-ssid-prof-test] undo mu-mimo disable
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204288

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next