No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ip address (WAN view)

ip address (WAN view)

Function

The ip address command configures the IP address, subnet mask, and default gateway address for a cloud AP's management VLANIF interface.

The undo ip address command deletes the IP address, subnet mask, and default gateway address of a cloud AP's management VLANIF interface.

By default, no IP address, subnet mask, or default gateway address is configured for a cloud AP's management VLANIF interface.

Format

ip address ip-address { mask-length | mask } [ gateway gateway ]

undo ip-address

Parameters

Parameter Description Value
ip-address Specifies a static IPv4 address of a cloud AP.

The value is in dotted decimal notation.

mask Specifies the IPv4 mask of a cloud AP.

The value is in dotted decimal notation.

mask-length Specifies the IPv4 mask length of a cloud AP. The value is an integer that ranges from 0 to 32.
gateway gateway Specifies the egress gateway address of a cloud AP.

The value is in dotted decimal notation.

Views

WAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure an IP address for a cloud AP's management VLANIF interface to enable the cloud AP to communicate with the Agile Controller-Campus. If the dhcp-client enable command is also executed, the new configuration takes effect.

Example

# Set IPv4 address of a cloud AP's management VLANIF interface to 192.168.1.123/24 and the gateway address to 192.168.1.254.

<Huawei> system-view
[Huawei] interface wan0
[Huawei-WAN] ip address 192.168.1.123 255.255.255.0 gateway 192.168.1.254
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203245

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next