No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display tftp-client

display tftp-client

Function

The display tftp-client command displays the source IP address configured for the TFTP client.

Format

display tftp-client

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

You can run the display tftp client command to query source IP address of the TFTP client. The default source IP address is 0.0.0.0 if tftp client-source is not configured.

Example

# Display the source IP address configured for the TFTP client.

<Huawei> display tftp-client
Info: The source address of TFTP client is 1.1.1.1.
Table 2-32  Description of the display tftp-client command output

Parameter

Description

Info: The source address of TFTP client is 1.1.1.1.

1.1.1.1 is the source IP address of the TFTP client.

You can run the tftp client-source command to configure the source IP address for the TFTP client.

If the IP address is configured for the source port, the message "The source interface of TFTP client is LoopBack0" is displayed.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194879

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next