No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
arp-miss speed-limit source-ip

arp-miss speed-limit source-ip

Function

The arp-miss speed-limit source-ip command sets the maximum number of ARP Miss messages based on the source IP address.

The undo arp-miss speed-limit source-ip command restores the default setting.

By default, the device processes a maximum of 5 ARP Miss messages triggered by IP packets from the same source IP address in 1 second.

Format

arp-miss speed-limit source-ip [ ip-address ] maximum maximum

undo arp-miss speed-limit source-ip [ ip-address ]

Parameters

Parameter Description Value
ip-address

Specifies the source IP address. If this parameter is specified, the maximum number of ARP Miss messages triggered by packets from this IP address is limited.

If this parameter is not specified, the maximum number of ARP Miss messages triggered by packets from each IP address is limited.

The value is in dotted decimal notation.
maximum maximum

Specifies the maximum number of ARP Miss messages based on the source IP address.

NOTE:

If the maximum number of ARP Miss messages triggered by packets from each IP address is limited, a large value is recommended for this parameter because a small value may cause discarding of valid packets. However, a too large value will deteriorate the system performance.

If an IP address initiates attacks, you can set the maximum number of ARP Miss messages triggered by packets from this IP address to a small value.

The value is an integer that ranges from 0 to 32768.

If the value is 0, the maximum number of ARP Miss messages is not limited based on the source IP address.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If the number of ARP Miss messages triggered by IP packets from a source IP address in 1 second exceeds the limit, the device considers that an attack is initiated from the source IP address. The administrator can use the arp-miss speed-limit source-ip command to set the maximum number of ARP Miss messages that the device can process within a specified duration, protecting the system resources and ensuring proper running of other services.

Example

# Set the maximum number of ARP Miss messages triggered by each source IP address in 1 second to 50.

<Huawei> system-view
[Huawei] arp-miss speed-limit source-ip maximum 50

# Set the maximum number of ARP Miss messages triggered by the IP address 10.0.0.1 in 1 second to 100, and set the maximum number of ARP Miss messages triggered by other source IP addresses in 1 second to 50.

<Huawei> system-view
[Huawei] arp-miss speed-limit source-ip maximum 50
[Huawei] arp-miss speed-limit source-ip 10.0.0.1 maximum 100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194705

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next