No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dot1x retry

dot1x retry

Function

The dot1x retry command configures the number of times an authentication request is retransmitted to an 802.1X user.

The undo dot1x retry command restores the default configuration.

By default, the device can retransmit an authentication request to an 802.1X user twice.

Format

dot1x retry max-retry-value

undo dot1x retry

Parameters

Parameter

Description

Value

max-retry-value

Specifies the number of times an authentication request is retransmitted to an 802.1X user.

The value is an integer that ranges from 1 to 10.

Views

802.1X access profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the device does not receive any response from a user within a specified time after sending an authentication request to the user, the device sends the authentication request again. If the authentication request has been sent for the maximum retransmission times and no response is received, the user authentication fails. In this process, the total number of authentication requests sent by the device is max-retry-value plus 1.

Precautions

Repeated authentication requests occupy a lot of system resources. When using the dot1x retry command, you can set the maximum number of times according to user requirements and device resources. The default value is recommended.

Example

# In the 802.1X access profile d1, configure the number of times an authentication request can be retransmitted to 802.1X users to 4.

<Huawei> system-view
[Huawei] dot1x-access-profile name d1
[Huawei-dot1x-access-profile-d1] dot1x retry 4
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194950

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next