No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
network-type

network-type

Function

The network-type command sets a network type and Internet access status in a Hotspot2.0 profile.

The undo network-type command restores the default network type and Internet access status.

By default, the network type is set to wildcard, and Internet access is not supported.

Format

network-type { emergency-service | personal-device | private | private-guest | public-chargeable | public-free | test | wildcard } [ internet-access ]

undo network-type

Parameters

Parameter

Description

Value

emergency-service

Indicates an emergency service network.

-

personal-device

Indicates a personal device network.

-

private

Indicates a private network.

-

private-guest

Indicates a private network with guest access.

-

public-chargeable

Indicates a chargeable public network.

-

public-free

Indicates a free public network.

-

test

Indicates a test network.

-

wildcard

Indicates a wildcard network.

-

internet-access

Indicates that Internet access is supported.

-

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When multiple Hotspot2.0 networks are available, user terminals need to obtain information of each network to select the network to access. The network type and Internet access status are mandatory in a Hotspot2.0 profile. Beacon and Probe Response frames sent from Hotspot2.0-capable APs carry network parameter information, which helps user terminals to discover and select proper networks.

Precautions

If the command is executed repeatedly, only the latest configuration takes effect.

Example

# Set the network type to free public network and configure the network to provide Internet access in Hotspot2.0 profile hotspot.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] hotspot2-profile name hotspot
[Huawei-wlan-hotspot2-prof-hotspot] network-type public-free internet-access
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199141

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next