No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radius-attribute disable

radius-attribute disable


The radius-attribute disable command disables a RADIUS attribute.

The undo radius-attribute disable command enables a disabled RADIUS attribute.

By default, no RADIUS attribute is disabled.


radius-attribute disable attribute-name { receive | send } *

undo radius-attribute disable [ attribute-name ]






Specifies the name of a RADIUS attribute.

The value is a string of 1 to 64 characters. After the name is entered, the system automatically associates the RADIUS attribute with the name.

Disables a RADIUS attribute for received packets.



Disables a RADIUS attribute for sent packets.



RADIUS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Generally, a RADIUS server connects to multiple network devices, which can be one vendor's devices or different vendors' devices. If some vendors' devices require the RADIUS server to deliver an attribute to support a specified feature but other vendors' device do not support the delivered attribute, the RADIUS attribute may fail to be parsed.

The device may communicate with RADIUS servers of different vendors. Some RADIUS servers require the device to send some attributes but other RADIUS servers cannot process the attributes. Errors may occur.

The radius-attribute disable command disables RADIUS attributes on the device. You can configure the device to ignore incompatible attributes when receiving RADIUS packets to prevent parsing failures. You can also configure the device to disable RADIUS attributes when sending RADIUS packets. When the device sends RADIUS packets, it does not encapsulate the disabled RADIUS attributes in the RADIUS packets.


The RADIUS attribute translation function has been enabled using the radius-server attribute translate command.


Before disabling RADIUS attributes, run the display radius-attribute command to view the RADIUS attributes supported by the device.


# Disable the Frame-Route attribute in sent packets.

<Huawei> system-view
[Huawei] radius-server template test1
[Huawei-radius-test1] radius-server attribute translate
[Huawei-radius-test1] radius-attribute disable framed-route send
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207915

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next