No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display sta-load-balance static-group

display sta-load-balance static-group

Function

The display sta-load-balance static-group command displays information about a static load balancing group.

Format

display sta-load-balance static-group { all | name group-name }

Parameters

Parameter Description Value
all

Displays information about all static load balancing groups.

-

name group-name

Displays information about a specified static load balancing group.

The static load balancing group must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display sta-load-balance static-group command to view information about a specified static load balancing group or all static load balancing groups.

Example

# Display information about all static load balancing groups.

<Huawei> display sta-load-balance static-group all
------------------------------------------------------------
Index  Group name
------------------------------------------------------------
0      cc
1      coco
------------------------------------------------------------
Total: 2
Table 19-16  Description of the display sta-load-balance static-group all command output
Item Description

Index

Index.

Group name

Name of a static load balancing group.

# Display information about the static load balancing group cc.

<Huawei> display sta-load-balance static-group name cc
--------------------------------------------------------------------            
Group name                                  : 123                               
Load-balance mode                           : sta-number                        
Deny threshold                              : 3                                 
Sta-number start threshold                  : 10                                
Sta-number gap threshold(percentage)        : -                                 
Sta-number gap threshold(number)            : 3                                 
Channel-utilization start threshold(%)      : 50                                
Channel-utilization gap threshold(%)        : 20                                
RSSI threshold(dBm)                         : -65                               
RSSI diff gap(dBm)                          : 5                                 
Deauth fail times                           : 2                                 
Btm fail times                              : 5                                 
Steer-restrict restrict time(s)             : 5                                 
Steer-restrict probe threshold              : 5                                 
Steer-restrict auth threshold               : 0                                 
--------------------------------------------------------------------            
RfID: Radio ID                                                                  
CurEIRP: Current EIRP (dBm)                                                     
Act CH: Actual channel, Cfg CH: Config channel, CU: Channel utilization         
-----------------------------------------------------------------------         
AP ID  AP Name  RfID  Act CH/Cfg CH   CurEIRP/MaxEIRP  Client CU
------------------------------------------------------------------
2      area_2   0     6/-            28/28            0       37%  
2      area_2   1     153/-          29/29            0       76%  
3      area_3   0     1/-            28/28            0       68%  
3      area_3   1     149/-          29/29            0       5%   
------------------------------------------------------------------
Total: 4
Table 19-17  Description of the display sta-load-balance static-group name command output
Item Description

Group name

Name of a static load balancing group.

Load-balance mode

Load balancing mode.
  • channel-utilization: dynamic load balancing based on the channel usage
  • sta-number: dynamic load balancing based on the number of users.

To configure this parameter, run the mode (static load balancing group view) command.

Deny threshold

Maximum number of times an AP rejects association requests of a STA in a static load balancing group.

To configure this parameter, run the deny-threshold command.

Sta-number start threshold

Start threshold for load balancing based on the number of users in a static load balancing group.

To configure this parameter, run the sta-number start-threshold command.

Sta-number gap threshold(percentage)

Load difference threshold for static load balancing based on the percentage of users.

To configure this parameter, run the sta-number gap-threshold command.

Sta-number gap threshold(number)

Load difference threshold for static load balancing based on the number of users.

To configure this parameter, run the sta-number gap-threshold command.

Channel-utilization start threshold(%)

Start threshold for load balancing based on the channel usage in a static load balancing group.

To configure this parameter, run the channel-utilization start-threshold command.

Channel-utilization gap threshold(%):

Load difference threshold for load balancing based on the channel usage in a static load balancing group.

To configure this parameter, run the channel-utilization gap-threshold command.

RSSI threshold(dBm)

RSSI threshold for members in a static load balancing group.

To configure this parameter, run the rssi-threshold command.

RSSI diff gap(dBm)

RSSI difference threshold for members in a static load balancing group.

To configure this parameter, run the rssi-diff-gap command.

Deauth fail times

Number of attempts to migrate STAs in deauthentication mode.

To configure this parameter, run the deauth-fail-times command.

Btm fail times

Number of attempts to migrate STAs in BTM mode.

To configure this parameter, run the btm-fail-times command.

Steer-restrict restrict time(s)

Duration within which non-target APs suppress association of STAs during migration of the STAs.

To configure this parameter, run the steer-restrict restrict-time command.

Steer-restrict probe threshold

Maximum number of times non-target APs suppress probing of STAs during migration of the STAs.

To configure this parameter, run the steer-restrict probe-threshold command.

Steer-restrict auth threshold

Maximum number of times non-target APs suppress authentication of STAs during migration of the STAs.

To configure this parameter, run the steer-restrict auth-threshold command.

AP ID

ID of the AP that joins a static load balancing group.

AP Name

Name of the AP that joins a static load balancing group.

RfID

Radio that joins a static load balancing group.

Act CH/Cfg CH

Actual effective/configured channel of an AP.

CurEIRP/MaxEIRP

Current power of an AP radio/Maximum power of an AP radio.

Client

Number of STAs connected to an AP radio.

CU

Usage of a channel.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 212640

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next