No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
stream-reassemble enable

stream-reassemble enable


The stream-reassemble enable command enables TCP stream reassembly.

The undo stream-reassemble enable command disables TCP stream reassembly.


stream-reassemble enable

undo stream-reassemble enable




System view

Default Level

2: Configuration level

Usage Guidelines

By default, TCP stream reassembly is enabled.

If TCP stream reassembly is disabled, TCP packets will not be reassembled and will not be inspected. Meanwhile, security inspections based on TCP streams may also fail.


# Enable TCP stream reassembly.

<Huawei> system-view
[Huawei] stream-reassemble enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202214

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next