No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-mode-switch check

ap-mode-switch check


The ap-mode-switch check command checks whether the file system on an AP allows switching between a fit AP and a fat AP.

Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN support this command.


ap-mode-switch check




System view

Default Level

3: Management level

Usage Guidelines

Before switching a fat AP to a fit AP or a fit AP to a fat AP, run this command to check whether the file system on the AP allows switching between the fit AP and fat AP. System software can be changed or upgraded only when the file system on the device allows switching between the fit AP and fat AP.

If the file system does not allow switching from a fit AP to a fat AP, run the ap-mode-switch prepare command to configure the file system to allow switching from a fit AP to a fat AP.


# Check whether the file system on a fat AP allows switching to a fit AP.

<Huawei> system-view
[Huawei] ap-mode-switch check
Info: Ap-mode-switch check ok.
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203011

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next