No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display vrrp protocol-information

display vrrp protocol-information

Function

The display vrrp protocol-information command displays VRRP information.

Format

display vrrp protocol-information

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display vrrp protocol-information command to view information about VRRP.

Example

# Display VRRP information.

<Huawei> display vrrp protocol-information
 VRRP protocol information is shown as below:                                   
    VRRP protocol version : V3                                                  
    Send advertisement packet mode : send v3 only  
Table 25-16  Description of the display vrrp protocol-information command output
Item Description

VRRP protocol version

VRRP version number:
  • V2

  • V3

To configure a VRRP version number, run the vrrp version command.

Send advertisement packet mode

Mode in which VRRP Advertisement packets of a super-VLAN are sent:
  • send v2 only: Only VRRPv2 Advertisement packets are sent.

  • send v3 only: Only VRRPv3 Advertisement packets are sent. The version number must be VRRPv3.

  • send v2v3 both: VRRPv2 and VRRPv3 Advertisement packets are sent. The version number must be VRRPv3.

To configure the mode in which VRRP Advertisement packets of a super-VLAN are sent, run the vrrp vrid version-3 send-packet-mode command in the interface view or run the vrrp version-3 send-packet-mode command in the system view.
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194898

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next