No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mode (static load balancing group view)

mode (static load balancing group view)

Function

The mode command configures the static load balancing mode.

The undo mode command restores the default static load balancing mode.

By default, static load balancing based on the number of users is used.

Format

mode { sta-number | channel-utilization }

undo mode

Parameters

Parameter

Description

Value

sta-number

Controls user access based on the number of users.

-
channel-utilization

Controls user access based on the channel usage.

-

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the mode command to configure the static load balancing mode based on the actual environment to provide better network experience for users.

Static load balancing based on the channel usage uses a complex algorithm but is accurately implemented to ensure user experience and service quality. This mode is recommended when service types and traffic volumes differ greatly among users.

Static load balancing based on the number of users is less accurate but uses a simple algorithm. This mode is recommended when most users have the same type of services and similar service traffic volumes.

Precautions

When configuring RUs to load balance traffic based on the channel usage, run the ap data-collection enable command to enable the RU data buffering function on the central AP. If this function is disabled, static load balancing based on the channel usage does not take effect.

Example

# Configure static load balancing based on the channel usage.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] sta-load-balance static-group name default
[Huawei-wlan-sta-lb-static-default] mode channel-utilization
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211814

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next