No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The roaming-consortium-profile command creates a roaming consortium profile or displays the view of an existing roaming consortium profile.

The undo roaming-consortium-profile command deletes a roaming consortium profile.

By default, no roaming consortium profile is created.


roaming-consortium-profile name profile-name

undo roaming-consortium-profile { name profile-name | all }





name profile-name

Specifies the name of a roaming consortium profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").


Deletes all roaming consortium profiles.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When configuring Hotspot2.0 services, configure network parameters according to operator requirements. When connecting to networks, user terminals can obtain the network parameters to select desired networks. If the user terminals need to roam among Hotspot2.0 networks of different operators, configure a roaming consortium profile and add the organization identifiers (OIs) of the operators to the roaming consortium profile. In this way, after the user terminals connect to a network of an operator in the profile, they can roam to networks of the other operators while maintaining online.

Follow-up Procedure

Run the roaming-consortium-oi command to configure the roaming consortium OI in the roaming consortium profile.


The device supports a maximum of 32 roaming consortium profiles.


# Create the roaming consortium profile roaming-consortium-profile1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] roaming-consortium-profile name roaming-consortium-profile1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 212731

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next