No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp server ip-range

dhcp server ip-range

Function

The dhcp server ip-range command sets the range of IP addresses that a DHCP server pre-allocates to DHCP clients.

The undo dhcp server ip-range command deletes the configured IP address range.

By default, the range of IP addresses that a DHCP server pre-allocates to DHCP clients is not configured.

Format

dhcp server ip-range start-ip-address end-ip-address

undo dhcp server ip-range

Parameters

Parameter Description Value
start-ip-address Specifies the start IP address. The value is in decimal dotted notation.
end-ip-address Specifies the end IP address. The value is in decimal dotted notation.

Views

VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Prerequisites

Usage Scenario

You can run the dhcp server ip-range start-ip-address end-ip-address command to change the range of IP addresses in an address pool based on actual usage of IP addresses.

Prerequisites

The DHCP server function of the interface address pool has been enabled on interfaces using the dhcp select interface command.

Example

# Enable a DHCP server on a VLANIF100 to pre-allocate IP addresses 192.168.1.2 to 192.168.1.100 to DHCP clients.

<Huawei> system-view
[Huawei] dhcp enable
[Huawei] interface vlanif 100
[Huawei-Vlanif100] ip address 192.168.1.1 24
[Huawei-Vlanif100] dhcp select interface
[Huawei-Vlanif100] dhcp server ip-range 192.168.1.2 192.168.1.100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196689

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next