No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
access-user syslog-restrain enable

access-user syslog-restrain enable


The access-user syslog-restrain enable command enables system log suppression.

The undo access-user syslog-restrain enable command disables system log suppression.

By default, system log suppression is enabled.


access-user syslog-restrain enable

undo access-user syslog-restrain enable




System view

Default Level

2: Configuration level

Usage Guidelines

When a user fails in authentication or goes offline, the device records a system log. The system log contains the MAC addresses of access device and access user and the authentication time.

If a user repeatedly attempts to go online after authentication failures or frequently goes online and offline in a short period, a lot of system logs are generated, which waste system resources and degrade system performance. System log suppression can address this problem. After the device generates a system log, it will not generate the same log within the suppression period (set by access-user syslog-restrain period).

In normal cases, the device implements system log suppression based on user MAC addresses. For example, after the device generates a system log after an authentication failure and finds that the user with the same MAC address failed the user authentication again during the suppression period, the device will not generate any system log. The condition is the same if the user is offline. If the device fails to obtain the MAC address of an online user, the user name and access type will be used for system log suppression.


# Enable system log suppression.

<Huawei> system-view
[Huawei] access-user syslog-restrain enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207961

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next