No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent sys-info

snmp-agent sys-info

Function

The snmp-agent sys-info command sets the SNMP system information.

The undo snmp-agent sys-info command restores the default setting.

By default, the system maintenance information is " R&D Shenzhen, Huawei Technologies Co.,Ltd.": the system location is Shenzhen China" and the version is SNMPv3.

Format

snmp-agent sys-info { contact contact | location location | version { { v1 | v2c | v3 } * | all } }

undo snmp-agent sys-info { contact | location | version { { v1 | v2c | v3 } * | all } }

Parameters

Parameter Description Value
contact contact Indicates contact information of system maintenance. It is a string of 1 to 225 characters that can contain spaces.
location location Indicates the location of a device. It is a string of 1 to 255 characters that can contain spaces.
version { { v1 | v2c | v3 } * | all } Indicates the SNMP version.
  • v1: SNMPv1 is enabled.
  • v2c: SNMPv2c is enabled.
  • v3: SNMPv3 is enabled.
  • all: SNMPv1, SNMPv2c, and SNMPv3 are enabled.
-

Views

System view

Default Level

3: Management level

Usage Guidelines

To configure the contact information for the managed node, you can run the snmp-agent sys-info contact command in the system. If a device fails, maintenance personnel can contact the vendor for device maintenance.

To configure the physical location of the node, you can run the snmp-agent sys-info location command in the system.

To configure features in a specified version, you can run the snmp-agent sys-info version command to set the corresponding SNMP version in the system. SNMPv1 or SNMPv2c is not secure enough. Using SNMPv3 is recommended.

SNMPv1:
  • Community-name-based access control
  • MIB-view-based access control
SNMPv2c:
  • Community-name-based access control
  • MIB-view-based access control
Besides inheriting basic SNMPv2c operations, SNMPv3 defines a management architecture, which introduces a User-based Security Model (USM) to provide users with a more secure access mechanism.
  • User group
  • Group-based access control
  • User-based access control
  • Authentication and encryption mechanisms

Use display snmp-agent sys-info command to view the information of the system maintenance, the physical location of the node and the SNMP version.

Example

# Set the contact information of the system maintenance as "call Operator at 010-12345678".

<Huawei> system-view
[Huawei] snmp-agent sys-info contact call Operator at 010-12345678

# Set the location of a device as "shanghai China".

<Huawei> system-view
[Huawei] snmp-agent sys-info location shanghai China

# Set the current SNMP version used by the system to v1.

<Huawei> system-view
[Huawei] snmp-agent sys-info version v1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207084

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next