No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
web-auth-server source-ip

web-auth-server source-ip

Function

The web-auth-server source-ip command configures the source IP address for the device to communicate with the Portal server in the system view.

The undo web-auth-server source-ip command restores the default setting.

By default, no source IP address is configured for the device to communicate with the Portal server in the system view.

Format

web-auth-server source-ip ip-address

undo web-auth-server source-ip

Parameters

Parameter Description Value
ip-address Specifies the source IP address for the device to communicate with the Portal server. The value is in dotted decimal notation.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To ensure proper communication between the device and the Portal server, configure the source IP address for the device to communicate with the Portal server.

The source IP address configured in the system view for the device to communicate with the Portal server takes effect for all Portal server templates. If a source IP address for the device to communicate with the Portal server has been configured using the source-ip (Portal server profile view) command in the Portal server template view, and a source IP address for the device to communicate with the Portal server is also configured in the system view, the configuration in the template is used preferentially.

Precautions

The configured source IP address must be the device's IP address, and cannot be all 0s, all 1s, a class D address, a class E address, or a loopback address.

Example

# Set the source IP address for the device to communicate with the Portal server to 192.168.1.100 in the system view.

<Huawei> system-view
[Huawei] web-auth-server source-ip 192.168.1.100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205288

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next