No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nat alg

nat alg

Function

The nat alg command enables the NAT ALG function for application protocols.

The undo nat alg command disables the NAT ALG function for application protocols.

By default, NAT ALG is disabled.

Format

nat alg { all | protocol-name } enable

undo nat alg { all | protocol-name } enable

Parameters

Parameter

Description

Value

all

Enables the NAT ALG function for DNS, FTP, PPTP and RTSP.

-

protocol-name

Enables the NAT ALG function for the specified protocol type.

The value can be pptp and rtsp.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After the NAT ALG function is enabled for an application protocol, packets of the application protocol can traverse the public network through NAT. Otherwise, the application protocol cannot work normally.

Example

# Enable the NAT ALG function for FTP.

<Huawei> system-view
[Huawei] nat alg ftp enable

# Disable the NAT ALG function for FTP.

<Huawei> system-view
[Huawei] undo nat alg ftp enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207994

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next