No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
network (IP address pool view)

network (IP address pool view)


The network command sets a network segment address for a global address pool.

The undo network command restores the default network segment address.

By default, no network segment address is specified.


network ip-address [ mask { mask | mask-length } ]

undo network






Specifies a network segment address.

The value is in dotted decimal notation.


Specifies the mask of the network segment address. If this parameter is not specified, the natural mask is used.



Specifies the mask of the network segment address.

The value is in dotted decimal notation.


Specifies the network mask length of the DHCP server.

The value is an integer that ranges from 0 to 32.


IP address pool view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command applies to DHCP servers. Before a DHCP server assigns IP addresses to clients from a global address pool, run the network command to set a network segment address for the global address pool so that the DHCP server can select and assign IP addresses on this network segment to clients. When a DHCP server assigns an IP address to the client from the interface address pool, the network segment of the interface IP address is that of the interface address pool.


Each IP address pool can be configured with only one network segment. If the system needs multiple address segments, multiple IP address pools are required.

The size of an address pool can be controlled by setting the mask length. The mask length is in reverse proportion to the address pool size.

When configuring an address pool, ensure that IP addresses on the network address segment must be class A, B, or C IP addresses, and the mask cannot be set to 0, 1, 31, or 32.

The size of the IP address pool cannot be larger than 1K.


# Set the network segment address of the IP address pool global1 to and mask length to 24.

<Huawei> system-view
[Huawei] ip pool global1
[Huawei-ip-pool-global1] network mask 24
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 201236

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next