No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The netbios-type command configures the NetBIOS node type for the DHCP client.

The undo netbios-type command deletes a configured NetBIOS node type.

By default, no NetBIOS node type for the DHCP client is configured.


netbios-type { b-node | h-node | m-node | p-node }

undo netbios-type






Indicates a node in broadcast mode. A b-node obtains the mapping between host names and IP addresses in broadcast mode.



Indicates a node in hybrid mode. An h-node is a b-type node enabled with the end-to-end communication mechanism.



Indicates a node in mixed mode. An m-node is a p-type node with some broadcast features.



Indicates a node in peer-to-peer mode. A p-node obtains the mapping between host names and IP addresses by communicating with a NetBIOS server.



IP address pool view, DHCP Option template view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command applies to DHCP servers. When a DHCP client uses NetBIOS for communication, its host name needs to be mapped to an IP address, and the NetBIOS node type needs to be specified for it using the netbios-type command. When a DHCP server assigns an IP address to clients, it also sends the specified NetBIOS node type to clients.


To specify the NetBIOS node type for a client in the interface address pool, run the dhcp server netbios-type command.


# In the IP address pool view, set the NetBIOS node type for the DHCP client to b-node.
<Huawei> system-view
[Huawei] ip pool global1
[Huawei-ip-pool-global1] netbios-type b-node
# In the DHCP Option template view, set the NetBIOS node type for the DHCP client to b-node.
<Huawei> system-view
[Huawei] dhcp option template template1
[Huawei-dhcp-option-template-template1] netbios-type b-node
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205291

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next