No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mesh-profile

display mesh-profile

Function

The display mesh-profile command displays reference or configuration information about Mesh profiles.

Format

display mesh-profile { all | name profile-name }

Parameters

Parameter

Description

Value

all

Displays reference information about all Mesh profiles.

-

name profile-name

Displays reference information about a specified Mesh profile.

The Mesh profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display mesh-profile command to view the number of times a Mesh profile is referenced or configuration information of a specified Mesh profile.

Example

# Display reference information about all Mesh profiles.

<Huawei> display mesh-profile all
--------------------------------------------------------------------------------
Profile name                         Reference                                  
--------------------------------------------------------------------------------
default                              0                                          
test                                 2                                          
--------------------------------------------------------------------------------
Total: 2                                                                        
Table 14-6  Description of the display mesh-profile all command output

Item

Description

Profile name

Mesh profile name.

To create a Mesh profile, run the mesh-profile command.

Reference

Number of times a Mesh profile is referenced.

# Display information about the Mesh profile test.

<Huawei> display mesh-profile name test
--------------------------------------------------------------------------------
Mesh handover profile            :
Security profile                 : default-mesh
Mesh ID                          : HUAWEI-WLAN-MESH
Max link number                  : 8
Link RSSI threshold(dBm)         : -75
Link report interval(s)          : 30
Link aging timeout(s)            : 60
Priority map trust               : DSCP
Priority map mode                : DSCP map 802.11e
                                   0-7 map 0
                                   8-15 map 1
                                   16-23 map 2
                                   24-31 map 3
                                   32-39 map 4
                                   40-47 map 5
                                   48-55 map 6
                                   56-63 map 7
DHCP trust port                  : enable
Client mode                      : disable
Beacon 2.4G rate(Mbps)           : 1
Beacon 5G rate(Mbps)             : 6
Switch probe interval(s)         : 10
--------------------------------------------------------------------------------
Table 14-7  Description of the display mesh-profile name command output

Item

Description

Mesh handover profile

Mesh handover profile bound to a Mesh profile.

To bind a Mesh handover profile to a Mesh profile, run the mesh-handover-profile (Mesh profile view) command.

Security profile

Security profile bound to a Mesh profile.

To bind a security profile to a Mesh profile, run the security-profile (Mesh profile view) command.

Mesh ID

Mesh ID of a Mesh profile.

To set a Mesh ID, run the mesh-id command.

Max link number

Maximum number of Mesh links allowed on an AP.

To set the maximum number of Mesh links, run the max-link-number command.

Link RSSI threshold

RSSI threshold of a Mesh link.

To set the RSSI threshold of a Mesh link, run the link-rssi-threshold command.

Link report interval

Interval for reporting Mesh link information.

To set the interval for reporting Mesh link information, run the link-report-interval command.

Link aging timeout

Aging time of a Mesh link.

To set the aging time of a Mesh link, run the link-aging-time command.

Priority map trust

Priority mapping trusted by the Mesh air interface.

To configure the parameter, run the priority-map trust (Mesh profile view) command.

Priority map mode

Mapping from DSCP priorities to 802.11e user priorities on the Mesh air interface.

To configure the parameter, run the priority-map dscp (Mesh profile view) command.

DHCP trust port

Whether to enable a DHCP trusted port in a Mesh profile.
  • enable: A DHCP trusted port is enabled.
  • disable: A DHCP trusted port is disabled.

To enable a DHCP trusted port in a Mesh profile, run the dhcp trust port (Mesh profile view) command.

Client mode

Whether to enable the Mesh client mode.

  • enable: The Mesh client mod is enabled.
  • disable: The Mesh client mod is disabled.

Beacon-2g-rate

Transmit rate of 2.4 GHz Beacon frames configured in the WDS profile.

To configure the parameter, run the beacon-2g-rate command.

Beacon-5g-rate

Transmit rate of 5 GHz Beacon frames configured in the WDS profile.

To configure the parameter, run the beacon-5g-rate command.

Switch probe interval

Mesh handover probe interval configured in the Mesh profile.

To configure the parameter, run the switch-probe-interval command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207130

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next