No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance dynamic disable

sta-load-balance dynamic disable


The sta-load-balance dynamic disable command disables the dynamic load balancing function.

The undo sta-load-balance dynamic disable command enables the dynamic load balancing function.

By default, the dynamic load balancing function is enabled.

Only cloud APs support this command.


sta-load-balance dynamic disable

undo sta-load-balance dynamic disable




RRM profile view

Default Level

2: Configuration level

Usage Guidelines

On a Layer 2 network, multiple APs (less than 50) that can discover each other can form a dynamic load balancing group and elect a leader AP. After a STA connects to an AP, the leader AP checks whether the AP reaches the load balancing threshold, and determines whether to steer the STA to a neighboring AP that meets load balancing requirements based on the load balancing algorithm.


# Disable dynamic load balancing.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name default
[Huawei-wlan-rrm-prof-default] sta-load-balance dynamic disable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207370

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next