No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
connection-capability-profile (Hotspot2.0 profile view)

connection-capability-profile (Hotspot2.0 profile view)


The connection-capability-profile command binds a connection capability profile to a Hotspot2.0 profile.

The undo connection-capability-profile command unbinds a connection capability profile from a Hotspot2.0 profile.

By default, no connection capability profile is bound to a Hotspot2.0 profile.


connection-capability-profile profile-name

undo connection-capability-profile






Specifies the name of a connection capability profile.

The connection capability profile must exist.


Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure Hotspot2.0 services for networks. When user terminals connect to the networks, they can obtain network connection capability information from APs, including allowed protocols and ports, which helps them to select desired networks. You can run the connection-capability-profile command to create a connection capability profile and run the connection-capability command to set whether networks support specific IP protocols and ports. After that, you bind the connection capability profile to a Hotspot2.0 profile.


# Bind the connection capability profile connection-capability-profile1 to the Hotspot2.0 profile hotspot.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] hotspot2-profile name hotspot
[Huawei-wlan-hotspot2-prof-hotspot] connection-capability-profile connection-capability-profile1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203372

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next