No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wired-port-profile (WLAN view)

wired-port-profile (WLAN view)


The wired-port-profile command creates an AP wired port profile and displays the AP wired port profile view, or displays the view of an existing AP wired port profile.

The undo wired-port-profile command deletes an AP wired port profile.

By default, the system provides the AP wired port profile default.


wired-port-profile name profile-name

undo wired-port-profile { name profile-name | all }





name profile-name

Specifies the name of an AP wired port profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot begin or end with double quotation marks (" ").


Deletes all AP wired port profiles.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An AP wired port profile provides convenience for AP wired interface management and configuration. You can configure AP wired interface parameters in an AP wired port profile to manage APs.

Follow-up Procedure

Run the wired-port-profile (AP group view and view) command to bind the AP wired port profile to an AP or AP group so that the AP wired port profile can take effect.


  • The AP wired port profiledefault cannot be deleted.

  • The AP wired port profile referenced by an AP or AP group cannot be deleted. To delete the AP wired port profile, unbind it from the AP or AP group first.


# Create the AP wired port profile wired-port1 and display the AP wired port profile view.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] wired-port-profile name wired-port1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206027

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next