No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The snmp-agent command enables the SNMP agent function.

The undo snmp-agent command disables the SNMP agent function.

By default, the SNMP agent function is disabled.



undo snmp-agent




System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Before configuring SNMP, you need to enable the SNMP agent function.

By executing the snmp-agent command with any parameter enables the SNMP agent function. For example, if you execute the snmp-agent community command, the community name gets created and also SNMP agent function is enabled.

After SNMP Agent is enabled, SNMPv3 is used. To use SNMPv1 or SNMPv2c, run the command snmp-agent sys-info version.

Configuration Impact

Running the undo snmp-agent command causes configuration of all SNMP versions (SNMPv1, SNMPv2c, and SNMPv3) on the device to become invalid.


# Enable the SNMP agent function.

<Huawei> system-view
[Huawei] snmp-agent

# Disable the SNMP agent function.

<Huawei> system-view
[Huawei] undo snmp-agent
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 200951

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next