No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
upgrade version check

upgrade version check


The upgrade version check command checks whether the upgrade assistant package is available before a device upgrade.

Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN support this command.


upgrade version check




System view

Default Level

3: Management level

Usage Guidelines

Before you upgrade a fat AP or fit AP (not by the AC), run this command to check whether the upgrade assistant package is available. You can upgrade a fat AP or fit AP using the available upgrade assistant package.

If the upgrade assistant package is not available, contact technical support personnel and update the upgrade assistant package under their guidance.


# Check whether the upgrade assistant package is available.

<Huawei> system-view
[Huawei] upgrade version check
Info: Upgrade version check ok.
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202333

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next