No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display alarm information

display alarm information


The display alarm information command displays alarm configurations.


display alarm information [ name alarm-name ]


Parameter Description Value
name alarm-name

Displays the configuration of a specified alarm. If this parameter is not set, configurations of all alarms are displayed.

The value is a string of 1 to 64 case-sensitive characters, spaces not supported.


All views

Default Level

1: Monitoring level

Usage Guidelines

To view alarm configurations on the device, run the display alarm information command.

If no alarm name is specified, information about all alarms in the system will be displayed.

In addition, to change the severity level of an alarm, you can run the alarm-name alarm-name severity severity command.


# Display information about the LinkUp alarm.
<Huawei> display alarm information name linkUp
  AlarmName: linkUp                                                             
  AlarmType: Resume Alarm                                                       
  AlarmLevel: Critical                                                          
  Suppress Period: 10s                                                          
  CauseAlarmName: linkDown                                                      
  Match VB Name: ifIndex                                                        
Table 4-17  Description of the display alarm information command output




Name of an alarm.


Alarm type:
  • Alarm: indicates a fault occurs.

  • Resume Alarm: indicates a fault is rectified.


Alarm severity.

You can run the alarm-name severity command to set this parameter.

Suppress Period

Alarm reporting delay.


Name of the root-cause alarm.

Match VB Name

Matching content of paired alarms.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196662

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next