No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
calibrate manual startup

calibrate manual startup


The calibrate manual startup command manually triggers radio calibration.


calibrate manual startup




WLAN view

Default Level

2: Configuration level

Usage Guidelines

To implement radio calibration instantly, you can run the calibrate enable { auto [ interval interval-value [ start-time start-time ] ] | manual | schedule time time-value } command to enable radio calibration and then run the calibrate manual startup command to manually trigger radio calibration.


# Manually trigger radio calibration.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] calibrate enable auto
[Huawei-wlan-view] calibrate manual startup
Warning: The operation may cause business interruption, Continue? [Y/N]:y
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 248598

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next