No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interface dialer

interface dialer


The interface dialer command creates a dialer interface and enters the dialer interface view.

The undo interface dialer command deletes the dialer interface.

By default, no dialer interface exists.


interface dialer number

undo interface dialer number


Parameter Description Value
number Specifies the number of a dialer interface.
The value is an integer that ranges from:
  • 1 to 4 for common APs
  • 1 to 8 for central APs


System view

Default Level

2: Configuration level

Usage Guidelines

A dialer interface is a logical interface for connecting a PPPoE client to a PPPoE server.


# Create interface dialer 1.

<Huawei> system-view
[Huawei] interface dialer 1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199132

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next