No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
beamforming enable

beamforming enable


The beamforming enable command enables Beamforming.

The undo beamforming enable command disables Beamforming.

By default, Beamforming is disabled.


beamforming enable

undo beamforming enable




2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Beamforming is a signal processing technique that controls signal transmission direction, and transmission and reception of radio signals. The transmit end uses weight to transmit signals. The signals are transmitted to the destination as narrow beams. Beamforming increases the signal-to-noise ratio (SNR) for the destination device.


# Enable Beamforming.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] radio-2g-profile name default
[Huawei-wlan-radio-2g-prof-default] beamforming enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204039

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next