No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remote-access-user manage

remote-access-user manage

Function

The remote-access-user manage command enables Hypertext Transfer Protocol (HTTP) or Hypertext Transfer Protocol Secure (HTTPS) based user management.

The undo remote-access-user manage command disables HTTP or HTTPS based user management.

By default, HTTP or HTTPS based user management is disabled.

Format

remote-access-user manage { http | https ssl-policy policy-name } port port-num [ acl acl-number ]

undo remote-access-user manage { http | https ssl-policy policy-name } port port-num [ acl acl-number ]

Parameters

Parameter

Description

Value

http

Indicates HTTP based user management.

-

https

Indicates HTTPS based user management.

-

ssl-policy policy-name

Specifies the Secure Sockets Layer (SSL) policy used by the built-in Portal server.

The value must be the name of an existing SSL policy.

port port-num

Specifies a port number.

The value is an integer that ranges from 1024 to 65535.

  • For HTTP, the value can be 80 or any integer in the range of 1025 to 55535.
  • For HTTPS, the value can be 443 or any integer in the range of 1025 to 55535.

acl acl-number

Specifies the number of an ACL.

The value is an integer that ranges from 3000 to 3999 and must be an existing ACL number.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the remote-access-user manage command is run, you can manage access users through HTTP or HTTPS on a remote host or server, including forcibly logging out users, authorizing user groups, and deregistering users (by modifying the user status to pre-connection). You can also configure an ACL rule in the command to specify which remote hosts or servers can be used to manage users.

Prerequisites

Before enabling HTTPS based user management, run the ssl policy policy-name command to create an SSL policy.

Example

# Enable HTTP or HTTPS based user management.

<Huawei> system-view
[Huawei] remote-access-user manage http port 8080
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199104

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next